** WWW.NINJAMOD.COM **

NINJAMOD'S 2.1 BIOS :

NEW STUFF ... 

MEMORY CARD MANAGER Courtesy of SCOGNITO
GCOM 2.2 Bundled Courtesy of Softdev (Rips original Discs in 2'6Mbyte Speed)
GCOS 1.5 Bundled - Public Domain Util
SDLOADER Bundled - Courtesy of Costis

GCOM 2.3,SDLOADER and GCOS 1.5 are not modified,they are 100% original


**Memory Card Manager is only tested with original MEMORY CARDS and DATEL 1024**
  We've got probs only with DONKEY KONGA savegame,,,to be fixed ..............

WE'RE NOT RESPONSABLE OF ANY DAMAGE IN YOUR MEMORY CARD * USE IT IN YOUR OWN RISK *

For those which can't make work our BIOS's or have probs installing perhaps you're too beginner and you need some technical help by Local professional ...

anyway we give you some HINTS:


UPDATING THE BIOS :

From BIOS1 ,Just Burn the ISO to a DVD+R or DVD-R (depends your DVDlent calibration) select UPDATE BIOS 2and 
make a SWAP METHOD set the bios file and press A when ordered ... 

From BIOS2 , with lastest 1.4 version (dvd-r nonswap) ,burn the ISO in a DVD-R and select UPDATE FROM Menu

HOW TO BURN THE BIOS :

Open NERO BURNING ROM ....SELECT BURN IMAGE ... IGNORE BLOCK SIZE ... SELECT DVD IN THE CORNER OF THE NEW WINDOW,
you can set "OPENED" DVD for faster burning ....


INSTALLING THE NINJAMOD :

*DO NOT USE long wires,all ones MUST be medium size maximum..This is very  important for X and B point.....if wire are long on these points Ninjamod will not boot....

*We recommend install ALTERNATIVE POINTS scheme if you haven't soldering skills......

*We recommend install the ninjamod without the F point,after you check the Ninjamod boots ... use that point if it's your choice .....with this new version point F is just needed to save changes or run the original bios..

*USE Medium or good Quality DVD-R/DVD+R media,bad DVD-R/DVD+R will no boot,or will produce DRE'S or
 bad readings ....

** WWW.NINJAMOD.COM **
